0
01392 275 256
All Categories
Dakine Snowboard Ski Fillmore Trigger Mitt 2017
Go Back
Dakine VIEW MORE FROM Dakine

Dakine Snowboard Ski Fillmore Trigger Mitt 2017

DK-0355-2017
RRP £45.00
Only £44.95
Save £0.05
Order deadline for despatch on
Need it sooner?

JUMP TO INFO & SPEC Ask a Question
Guide

Gloves

View Guide

THE BOARD BASEMENT GLOVES GUIDE

Scroll Down to Glove Size Guides

At The Board Basement you will find a range of different gloves and mittens that are suitable for all weather conditions. To go for a glove or mitten depends on what you prefer. Most skiers prefer a glove so they can get a good grip around their poles, whilst most snowboarders ride with mittens to keep the warmth and comfort levels high. Mittens are generally a bit warmer as mittens trap body heat and maintain the ability to keep you warm better. If you are lucky enough to be riding some powder, a glove or mitten with a longer cuff will keep the snow out. For warmer or spring days you need something that will protect you from wind and water but with little or no insulation so you don't get to sweaty. On The Board Basement website you can use our filters to find the right suited glove / mitten for you.

Fit

Hand Size

Most gloves come with pre curved finger construction. This will improve your performance articulation by shaping the palm pattern to fit the hand in the relaxed position, giving you an optimal fit with superior blood flow to the fingers and as a result leading to warmer hands.

To find the right size for you; Measure around the knuckles of your hand with a tape measure and use the guides below to find your size.

Size Inch Cm
Dakine Mens XS 5.5" to 6.5" 14 to 16.5 cm
S 6.5" to 7.5" 16.5 to 19 cm
M 7.5" to 8.5" 19 to 21.5 cm
L 8.5" to 9.5" 21.5 to 24 cm
XL 9.5" to 10.5" 24 to 27 cm
Size Inch Cm
Dakine Womens XS 5" to 5.5" 13 to 14 cm
S 5.5" to 6.5" 14 to 16 cm
M 6.5" to 7.5" 16.5 to 19 cm
L 7.5" to 8.5" 19 to 21 cm
XL 8.5" to 9.5" 21 to 24 cm
Size Inch Cm
Pow Mens S 7" 18 cm
M 7.5" to 8" 20 cm
L 8.5" to 9" 23 cm
XL 9.5" to 10" 25 cm
Size Inch Cm
Pow Womens XS 6" 15 cm
S 6.5" 17 cm
M 7" 18 cm
L 7.5" 19 cm
XL 8" 20 cm

Materials

As you ride you will become warm and start to sweat. If that moisture can't escape from the glove / mitten your hands will become wet. Wet and cold is not a good combination.

Gloves with premium leather materials such as Goat leather, Drum dyed leather are great for waterproof and breathability. Natural leather repels water, breaths and is very durable and soft so you get the ultimate in comfort and durability. You can use Nikwax to improve waterproofing and treat the leather to prolong the life of your gloves. Many leather gloves come with a sachet of Nikwax.

Shell fabrics such as Corded Nylon, Polyester and Cordura are treated with a Durable Water Repellent finish to act as an initial barrier to moisture. Helping your hands to stay warm and dry.

Gloves featuring Gore-tex inserts are considered to be completely waterproof and completely breathable. So if you see the Gore-tex logo you are guaranteed to stay dry.

Insulation

An insulated glove has an integrated moisture-wicking thermal lining. You will often get several layers of insulation fabric inside an outer layer of waterproof material. If you want gloves that will perform for most conditions through the season then look for a glove with good insulation. Below are the most common types of insulation

Primaloft insulation offers superior performance for high quality cold-weather gloves. Primaloft is lightweight, breathable and is proven to repel water better than any other synthetic or natural insulation, so you remain dry, warm and comfortable even under the most extreme conditions.

High loft synthetic is a synthetic insulation with an excellent balance of comfort, warmth and value. It resists moisture in wet conditions, providing loft retention and an air space that holds heat and keeps hands warm. The non-bulky nature of this insulation allows breathability when conditions are warmer.

Thinsulate Insulation is on of the warmest insulations on the market. Fine fibers trap body heat and maintain the ability to keep you warm. Thinsulate Insulation absorbs less than 1% of its weight in water. Even in soaking wet snow conditions, gloves or mittens with Thinsulate Insulation will retain the ability to keep you warm.

Non-insulated gloves are often referred to as a Pipe & park gloves. These gloves / mittens are not very warm but great for spring conditions or during warmer days.

Washing & Care

Very Important! Only machine-wash your gloves / mittens if you really need to. Do not machine -wash leather gloves / mittens! ?Check the label on the inside of the cuff for product specific washing instructions.

Zip up all zippers and attach all Velcro before loading!?Zipper sliders and teeth can easily be damaged in the washer and/or dryer.? Velcro gets clogged up with fuzz from other garments and can snag your other clothes, causing damage to both.

Front-load machine wash only! Using an agitator-style top-load washer could possibly do damage to your technical outerwear or clothing.

Gentle cycle should be all that is recommended to clean your technical outerwear.?If your gloves are stained, you may be out of luck.

Use cold water!?Actually, warm is OK, but cold is preferred to maintain the waterproofing.

Use outerwear-specific detergent or powder. Using liquid detergent that is not outerwear-specific clogs the pores of technical fabrics and damages the DWR coating, greatly reducing the performance (waterproof/breathability) of the garment.

Hang Dry in shade or Tumble Dry on Low Heat. Drying with excess heat can damage or melt fabric, zippers, and/or trims. Leave in until “almost dry” and change to NO HEAT or hang dry to finish.? Low heat actually helps re-activate waterproofing after washing.

Replenish Waterproofing as needed.?The waterproof coating (the magic that makes water droplets bead up on your outerwear) on all technical fabrics will become less effective over time and use?- especially if you are around campfires, smokers, oily lift pulleys, or other contaminants in general.? Revive the performance of your technical outerwear by washing as instructed, then using a spray-on waterproofing product such as NikWax TX-Direct.

Share it
Dakine Snowboard Ski Fillmore Trigger Mitt 2017

The Fillmore Snowboard Ski Trigger Mitts 2017 is a warm and waterproof Trigger Mitt from Dakine. The trigger mitts comes with DK Dry waterproof inserts that uses a unique film technology that maximizes value and comfort. DK Dry shuts out water from the outside, keeping hands warm and dry on the inside. If you are not familiar with the trigger mitt concept, it is merging a snowboard mitten with a ski glove to get the best of both worlds. Warm like a mitten but with more finger movement like a glove. Your index finger is separate so it is easier to adjust your bindings or other things that can be a bit tricky with mittens. Super comfortable and warm. Be a ninja turtle like you always wanted to.

Key Features

  • Cuff Closure: Adjustable hook and loop - Makes it easy to take on and off
  • Nose wipe thumb panels - Wipe that nose!
  • Touch screen compatible - Allows you to use your smart phone or other touch screen product on the go

Key Features

  • Insert: DK Dry waterproof
  • Insulation: High loft synthetic [ 60g / 170g ]
  • Palm: Durable water repellent leather
  • Lining: 300g fleece
Specification
Warmth
Features
Glove or Mitt Type
Main Colour

Specification


Close Clear All