0
01392 275 256
All Categories
Bent Metal Upshot Womens Snowboard Bindings 2018
Go Back
Bent Metal VIEW MORE FROM Bent Metal

Bent Metal Upshot Womens Snowboard Bindings 2018

BM-0001-2018
RRP £216.00
Only £151.20
Save £64.80
Order deadline for despatch on
Need it sooner?

JUMP TO INFO & SPEC Ask a Question
Guide

Bindings

View Guide

Snowboard Binding Guide

Scroll Down to Binding Size Guides

Goofy or Regular?

First of all you need to know which foot you should have in front when riding. As a rule, your dominant leg should be in front. If your left foot is in front it is called "Regular" and if your right foot is in front it is called "goofy". There is an easy way’s to find out which is your dominant leg (If you are riding Regular or Goofy);

Ask a friend, wife, husband or a next-door neighbour to stand behind you, and then gently push you forward. - The leg you make your first step forward with is usually the dominant leg. If you want to find out by yourself you can simply run and slide along a smooth surface. Your reflex will put your dominant leg in front.

Stance

Stance

This is all down to personal preference and where on the mountain you are going to spend the most time. When you stand on your board, your feet will be spread apart. A narrower stance helps the board carve a turn better, while a wider stance will give you better stability.

Riding powder? Set them back and you will increase the length of the nose of your snowboard, which will give it float in the pow.

Playing in the park? Centre the bindings if you are planning to ride park, pipe and rails. It is a lot easier to jump and ride switch (backwards) when the bindings are centred.

Doing a little bit of everything? Set them back one step.

How wide / narrow should they be?

Step onto the board (Without bindings attached) as you would go riding. If it feels good and natural, this is where you should mount your bindings. If you can't decide then you can do it roughly as far part as your shoulders.

In the end it is all down to comfort and choice. Do not be afraid to change your stance and play around with it. There are many tool stations on the slopes where you can change your bindings. All you need is a screwdriver. You will soon find what is best for you and your riding style. Most snowboards all ready come with a recommended stance marked on the board.

What are your angles?

Angles

The most common and possibly the most versatile one is what is some times refered to as duck. The front binding registers a positive angle while the back is set to a negative. This will allow you to ride switch and regular with equal ease and delivers a stable comfortable stance.

If you are just blasting down the mountain and not even thinking about riding switch then you might prefer positive angle on both front and back foot.

Here are some angles you can try:

Freestyle: Front foot +15 with back foot -15

All Mountain: Front foot +18 with back foot -9

Freeride: Front foot +21 with back foot 0

Forward Lean

Most riders do not bother using this feature. Forward lean describes the angle at which a binding's highback is set. The Highback is there to transfer power to heel edge of the board and the greater the angle, or forward lean, on the highback the greater the responsiveness delivered to the heal edge.

If you are a beginner, I would not worry about this too much for the moment. It is down to personal preference and something you can play around with as you progress. Some instructors use this as a tool to help riders bend their knees.

Fit

Make sure your boot size is compatible with the binding size you choose. At the board basement you can select your boot size to find the binding size that is right for you, using our filters.

Entry system

Most bindings are traditional Two-strap bindings, with an ankle strap and a toe-cap strap.

Flow Bindings and SP Bindings have a reclining highback which means you can enter the bindings from behind with ease. These are referred to as Fast Entry bindings.

Ride Size UK EU US CM
Men M 4-7.5 36.5-42 5-9 23-27
L 7-10.5 40.5-46 8-12 26-30
XL 10-14 44.5-50 11-15 29-33
Women S 1.5-4.5 34-37 4-7 21-24
M 4.5-8.5 37-42.5 7-11 24-28
Youth XS 10-13 29-33.5 11-1 16-19
S 1-4 34-38 2-5 20-23
Flow Size UK EU US CM
Men M 3.5-7 36-41 4.5-8 22.5-26
L 6.5-10 40-44.5 7.5-11 25.5-29
XL 9.5-14 44-49.5 10.5-15 28.5-32.5
Women M 3.5-7 36-41 6-9.5 22.5-26
L 6.5-10 40-44.5 9-11 25.5-29
Youth XS 10-13 29.5-32 11-1 17.5-19.5
S 12-4 31.5-36 13-4.5 19-22.5
M 12-4 31.5-36 13-4.5 19-22.5
K2 Size UK EU US CM
Men S 1-3.5 33-36 2-5 20-23
M 3.5-7.5 36-40.5 5-8 23-26
L 7-10 40.5-44.5 8-11 26-29
XL 10-14 44.5-50 11-15 29-33
Women S 1-3.5 33-36 3-6 20-23
M 3.5-7.5 36-41.5 6-10 23-27
Youth XS 10-13 29-33.5 11-1 16-19
S 1-4 34-38 2-5 20-23
Union Size UK EU US CM
Men S/M 4-7.5 37-41 5-8.5 23-26.5
M/L 7-10 40.5-44 8-11 26-29
L/XL 9.5-13 43.5-48 10.5-14 28.5-32
Women S 1.5-4.5 34-37.5 3-6 21-23.5
M 4.5-7.5 37-41 5.5-9 23-26.5
Youth Y 1.5-4.5 34-37.5 2.5-5.5 21-23.5
Contact & Contact Pro Size UK EU US CM
Men S/M 1.5-4.5 34-37.5 2.5-5.5 21-23.5
M/L 7-10 40.5-44 8-11 26-29
L/XL 9.5-13 43.5-48 10.5-14 28.5-32
Share it
Bent Metal Upshot Womens Snowboard Bindings 2018

Bent Metal have been around for years now and they relaunched with this awesome new product last year. The Upshot is a very nice lightweight womens binding aimed at the freestyle riders out there but this will equally ride all of the mountain very well. This is Bent Metal's softest flex control combination of a Urethane Highback and Bi-Axial Fiber Drive Plate which is forgiving but with good response. Bent Metal acheive this with their very unique drive plate which is made up of 7 layers of material including biaxial fibreglass in 2 separate layers just like your snowboard. This gives great response edge to edge and keeps everything under control. The highback is softer being made from Urethane (same stuff as skate wheels) but the top of the binding is slightly cupped so it holds the boot incredibly well so you get the best of both worlds. Bent Metal then use their original very clever forward lean system which doubles as a dampening tool. The square on the back of the higback turns with each side offering a different degree of forward lean, this must be the easiest system to adjust with the simple turn of the square. This is made from Urethane also meaning it will absorb shocks and vibrations very well, win win!

Key Features

  • Urethane Highback - Softer flexing highback
  • Ergonomic Highback - Meets the foot and calf exactly as it should
  • Composite Drive Plate - For excellent edge to edge response made up of the following parts below
  • EVA footbed - Comfy and vibration dampening foam
  • Eco sublimated topsheet - Graphic window
  • Biaxial Fibreglass - 2 layers on opposed access for extra response
  • Poly core - Holds the drive plate together
  • Co Extruded bottom sheet - Adds to a solid package
  • Fibre reinforced nylon carriage - Acts like a sidewall to bring the drive plate together
  • Forged Aluminium buckles - Strong and lightweight
  • Light form toe strap - Sits perfectly on the toe of the boot
  • Light form ankle strap - Lightweight, minimal design with good comfort
  • Urethane cube dampening forward lean adjuster
  • Pivot mini disc
Specification
Binding Flex
Binding Use
Binding Type
Binding Colour

Specification


Close Clear All